新聞中心
Home > News Center > Company News

How to use a controlled atmosphere sealed box multipurpose furnace?
2024-09-07 08:59:50

The process of using a controlled atmosphere sealed Box Multi-purpose Furnace requires certain operating steps to ensure safe and efficient heat treatment results. The following is a detailed guide:
1. Equipment inspection
Before use, first conduct a comprehensive inspection of the furnace body. Make sure there is no debris in the furnace, the sealing ring is intact, the control panel is working properly, and there is no leakage in the gas pipeline. These measures ensure the safety and effectiveness of the furnace body during operation.
2. Atmosphere selection
Choose the appropriate gas according to the experimental requirements. For example, nitrogen or hydrogen is often used for metal materials that need to avoid oxidation. Connect the gas bottle to the gas inlet of the furnace body and adjust the gas flow to ensure that the required atmosphere concentration is achieved.
3. Program setting
Enter the heating parameters on the control panel, including the target temperature, heating rate, and holding time. Make sure that these settings meet the heat treatment requirements of the material being processed. Note that the heating rate should be moderate to avoid stress in the material due to excessive temperature difference.
4. Sample loading
When the furnace body is cooled, use a high-temperature resistant crucible or tray to place the sample to be processed in the furnace. The samples should be evenly distributed and avoid contact with each other to ensure uniform heat conduction.
5. Sealing the furnace
After ensuring that the sample is loaded, close the furnace door and check whether the seal is good to prevent gas leakage. Confirm that the locking device is fully locked to prevent the furnace door from accidentally opening during the heating process.
6. Start heating
Start the furnace and observe the temperature curve displayed on the control panel. The furnace will heat up according to the preset program. Pay attention to monitor abnormal conditions during the heating process, such as overheating or unstable atmosphere.
7. Atmosphere monitoring
During the heating process, check the atmosphere state in the furnace regularly. Ensure that the gas flow and concentration remain within the set range. If there is any abnormality, adjust the gas flow in time.
8. Insulation and cooling
After reaching the set temperature, keep it for a period of time to achieve the heat treatment effect. After completion, turn off the heating system and start cooling. The atmosphere in the furnace should continue to be maintained at this stage until the temperature drops to a safe level.
9. Sampling and cleaning
After the temperature drops to a safe range, open the furnace door and carefully remove the sample using high-temperature resistant gloves. Subsequently, clean the residue in the furnace to ensure that the equipment is clean and ready for the next use.
10. Recording and maintenance
Record the data during the operation, including temperature changes, atmosphere conditions, etc., to provide reference for subsequent experiments. Maintain the equipment regularly to ensure its long-term stable operation.
Following the above steps, the controlled atmosphere sealed box multi-purpose furnace can be effectively used to ensure the smooth progress of the heat treatment process and obtain the ideal material properties.


Site map

Copyright @ 2024 Jiangsu Kingkind Industrial Furnace Co., Ltd. All Rights Reserved

久久青青草亚洲| 女女同性AV一区二区三| 黄片,91| 中文字幕人妻一区二五| 香蕉视频lite| 激情欧美一区二区三区在线观看| wwww.xxxxxxxx| 看成人免费日b视频在线观看| 91成人ai| 久垫大香亚洲一区二区三区| 3幼AV1区2区3区4区| 苗条少妇私密推油在线| 五月成人在线视频| 少妇人妻一区二| 欧美日韩一线性爱| 亚洲影院成人影院午夜影院| 亚洲美腿丝袜一区| 中文字幕av一区中文字幕天堂| 国产夫妻自拍A| 殴美一区二区黄片| 男女啪啪网址| 欧美一区二区蜜月久久 | 好屌妞无码视频| 校园春色日本有码| .亚洲精品少妇久久久久久海角社区 | 日本一区二区免费补卡| 欧美成人毛片网站| 乱伦综合网| 日韩黄色操屄视频| 亚洲欧美精品综合传媒一区| 国产中文精品视频| 日韩伦理电影av网| 色欲一区二| www.欧美成人日韩| 夜午夜日本| 五月丁香视频网址| 色yeye香蕉视频| 色色鲁视频| 理论视频网站在线观看| 91 中文字幕 国产| 日韩精品 亚洲 偷拍|